Network Configuration; Wireless Login To The Wireless Travel Router - NETGEAR WGR101 Reference Manual

This chapter describes how to configure the advanced features of your 54 Mbps Wireless Travel
Router WGR101. If the WGR101 switch is set at position 2 for multiple users, or position 3 for
configuration, you can access this feature. It can be found under the Advanced heading in the Main
Menu of the browser interface.

Wireless Login to the Wireless Travel Router

Follow these procedures to log in to the wireless travel router.
Figure 6-1: Switch position 2
Set the switch to position 2.
1.
Note: This procedure will work with the switch in position 3 as well. However, the login
process will lead to the Basic Settings page when the switch is in position 2 rather leading to
the Wireless Settings page when the switch is in position 3. In either case, you have full access
to all the configuration pages in the wireless travel router.
Connect the power cord to the wireless travel router and plug it into an outlet. The Power LED
2.
lights up.
Check the status lights and verify the following:
Power: When you first turn on the router, the power light blinks during the
diagnostic self test, then turns solid green.

Network Configuration

Network Configuration
February 2005 (202-10034-03)
Chapter 6
6-1