Dhcp Configuration Of Tcp/Ip In Windows 2000 - NETGEAR WGR101 Reference Manual

Reference Manual for the 54 Mbps Wireless Travel Router WGR101
• Verify that the Obtain an IP address
automatically radio button is selected.
• Verify that Obtain DNS server address
automatically radio button is selected.
• Click the OK button.
This completes the DHCP configuration of TCP/
IP in Windows XP.
Repeat these steps for each PC with this version
of Windows on your network.

DHCP Configuration of TCP/IP in Windows 2000

Once again, after you have installed the network card, TCP/IP for Windows 2000 is configured.
TCP/IP should be added by default and set to DHCP without your having to configure it.
However, if there are problems, follow these steps to configure TCP/IP with DHCP for Windows
2000.
C-10
February 2005 (202-10034-03)
Preparing Your Network