Vlan Acceptframe; No Vlan Acceptframe; Vlan Ingressfilter; No Vlan Ingressfilter - NETGEAR ProSafe FSM7328S User Manual

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

vlan acceptframe

This command sets the frame acceptance mode per interface. For VLAN Only mode, untagged
frames or priority frames received on this interface are discarded. For Admit All mode, untagged
frames or priority frames received on this interface are accepted and assigned the value of the
interface VLAN ID for this port. With either option, VLAN tagged frames are forwarded in
accordance with the IEEE 802.1Q VLAN Specification.
Default
Format
Mode

no vlan acceptframe

This command sets the frame acceptance mode per interface to Admit All. For Admit All mode,
untagged frames or priority frames received on this interface are accepted and assigned the value
of the interface VLAN ID for this port. With either option, VLAN tagged frames are forwarded in
accordance with the IEEE 802.1Q VLAN Specification.
Format
Mode

vlan ingressfilter

This command enables ingress filtering. If ingress filtering is disabled, frames received with
VLAN IDs that do not match the VLAN membership of the receiving interface are admitted and
forwarded to ports that are members of that VLAN.
Default
Format
Mode

no vlan ingressfilter

This command disables ingress filtering. If ingress filtering is disabled, frames received with
VLAN IDs that do not match the VLAN membership of the receiving interface are admitted and
forwarded to ports that are members of that VLAN.
Format
Mode
Switching Commands
admit all
vlan acceptframe <vlanonly | all
Interface Config
vlan acceptframe <vlanonly | all
Interface Config
disabled
vlan ingressfilter
Interface Config
no vlan ingressfilter
Interface Config
202-10088-01, March 2005
>
>
8-49