Show Ip Dhcp Conflict - NETGEAR ProSafe FSM7328S User Manual
Layer 3 managed switch software
Hide thumbs
Also See for ProSafe FSM7328S:
- Administration manual (124 pages) ,
- Hardware installation manual (40 pages) ,
- Operating instructions manual (24 pages)
Table of Contents
Advertisement
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
The number of IP addresses that have been manually mapped to the MAC
Manual bindings
addresses of hosts that are found in the DHCP database.
Expired bindings
Malformed messages
Message Received
DHCPREQUEST
DHCPDECLINE
DHCPRELEASE
DHCPINFORM
Message Sent
DHCPOFFER
DHCPACK
DHCPNACK
show ip dhcp conflict
This command displays address conflicts logged by the DHCP Server. If no IP address is specified,
all the conflicting addresses are displayed.
Format
Modes
IP address
Detection Method
Detection time
Switching Commands
The number of expired leases.
The number of truncated or corrupted messages that were
received by the DHCP server.
The number of DHCPREQUEST messages that were received
by the server.
The number of DHCPDECLINE messages that were received by
the server.
The number of DHCPRELEASE messages that were received by
the server.
The number of DHCPINFORM messages that were received by
the server.
The number of DHCPOFFER messages that were sent by the
server.
The number of DHCPPACK messages that were sent by the
server.
The number of DHCPNACK messages that were sent by the
server.
show ip dhcp conflict [ip-address]
Privileged EXEC
User EXEC
The IP address of the host as recorded on the DHCP server.
The manner in which the IP address of the hosts were found on
the DHCP Server
The time when the conflict was found.
202-10088-01, March 2005
8-93
Advertisement
Table of Contents
