No Ip Dhcp Pool; Lease; No Lease; Network - NETGEAR ProSafe FSM7328S User Manual

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Format
Mode

no ip dhcp pool

This command removes the DHCP address pool. The name should be previously configured pool
name.
Format
Mode

lease

This command configures the duration of the lease for an IP address that is assigned from a DHCP
server to a DHCP client. The overall lease time should be between 1-86400 minutes. If infinite is
specified, lease is set for 60 days. Days is an integer from 0 to 59. Hours is an integer from 0 to
1439. Minutes is an integer from 0 to 86399.
Default
Format
Mode

no lease

This command restores the default value of the lease time for DHCP Server.
Format
Mode

network

This command is used to configure the subnet number and mask for a DHCP address pool on the
server. Network-number is a valid IP address, made up of four decimal bytes ranging from 0 to
255. IP address 0.0.0.0 is invalid. Mask is the IP subnet mask for the specified address pool. The
prefix-length is an integer from 0 to 32.
Default
Format
Mode
8-86
ip dhcp pool <name>
Global Config Mode
no ip dhcp pool <name>
Global Config Mode
1 (day)
lease {[<days> [hours] [minutes]] | [infinite]}
DHCP Pool Config
no lease
DHCP Pool Config
none
network <networknumber> [mask | prefixlength]
DHCP Pool Config
202-10088-01, March 2005
Switching Commands