Security Commands; Port Security; No Port-Security - NETGEAR ProSafe FSM7328S User Manual

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
This section provides a detailed explanation of the Security commands. The commands are
divided into the following groups:
• Configuration commands are used to configure features and options of the switch. For every
configuration command there is a show command that will display the configuration setting.
• Show commands are used to display switch settings, statistics and other information.

Port Security

This section provides a detailed explanation of the Port Security commands. The commands are
divided into the following groups:
• Configuration commands are used to configure features and options of the switch. For every
configuration command there is a show command that will display the configuration setting.
• Show commands are used to display switch settings, statistics and other information.
port-security
This command enables port locking at the system level (Global Config) or port level (Interface
Config)
Default
Format
Modes

no port-security

This command disables port locking at the system level (Global Config) or port level (Interface
Config).
Format

Security Commands

Disabled
port-security
Global Config
Interface Config
no port-security
202-10088-01, March 2005
Chapter 9
Security Commands
9-1