GE Corometrics 250cx Series Operator's Manual page 52

3-18
Controls, Indicators, and Connectors: Rear Panel Description
250cx Series Rear Panel (Standard and Optional Features)
Name
AC Voltage Selection
Switch
M
Power Entry Module
N
CAUTION
NON-DESTRUCTIVE VOLTAGE—The maximum non-
destructive voltage that may be applied to the rear panel
connectors is 0 volts. Do not attempt to connect cables to these
connectors without contacting your Biomedical Engineering
Department or GE Medical Systems Information Technologies
Service Representative. This is to ensure the connectors comply
with leakage-current requirements of one of the following
applicable standards: Underwriters Laboratories UL-2601-1,
Canadian Standards Associations CSA 22.2 No. 125, or
International Electrotechnical Commission EN60601-1.
250cx Series Maternal/Fetal Monitor
2036946-001
Description
This switch is intended for qualified service
personnel to select a voltage range for the AC
input:
120: Accepts an AC input in the range of 100–
120 VAC.
240: Accepts an AC input in the range of 220–
240 VAC
AC line power cord receptacle. Refer to the rear
panel markings to verify line voltage and line
frequency requirements.
Revision C