GE Corometrics 250cx Series Operator's Manual page 39

# Name
R UA Connector
S US2 Connector
T US Connector
U FHR2 Volume Decrease Button
V FHR2 Volume Increase Button
W FHR1 Volume Decrease Button
X FHR1 Volume Increase Button
Y Alarm Silence Button
Revision C
Controls, Indicators, and Connectors: Front Panel Description
Front Panel
Connect a tocotransducer, IUPC, or strain gauge transducer plug to this white
receptacle. Contact your Sales Representative for information about compatibility.
Connect the secondary ultrasound transducer plug to this light gray receptacle.
Connect the primary ultrasound transducer plug to this light gray receptacle.
The four Volume buttons raise (
the rear panel speaker. The upper pair controls the volume for FHR1. The lower pair
controls the volume for FHR2. Volume settings have no effect on the processing used
to determine heart rate. The Volume buttons work in conjunction with the volume
control settings on the US/US2 Setup screen (page 5-3) and on the FECG Setup
screen (page 5-5).
Pressing this button removes the audible indication of an individual alarm. (Refer to
Re-Alarm in the "Alarms" Section for more information.)
250cx Series Maternal/Fetal Monitor
2036946-001
Description
) and lower ( ) the volume of sound emitted by
3-5