Additional Parameters; Maternal Nibp - GE Corometrics 250cx Series Operator's Manual

Additional Parameters

3-10
Controls, Indicators, and Connectors: Additional Parameters
The additional parameters area displays NIBP, MHR/P, and MSpO

Maternal NIBP

The maternal NIBP section is summarized in the following figure and table.
C
B
A
Name
NIBP Time Stamp
A
NIBP Values
B
NIBP Alarm Setting
Indicator
C
NIBP Mode Title
D
NIBP Countdown Timer
E
250cx Series Maternal/Fetal Monitor
2036946-001
E
D
NIBP
11:41
130/ 85
MAP (107)
03:15
NIBP Display
The time (in 24-hour format) of the last blood
pressure measurement.
The systolic/diastolic and mean arterial pressures
(MAP) are each indicated by up to three digits—
displayed as XXX mmHg or XX.X kPa. All kPa
readings are displayed to 1/10 kPa.
During a determination, the instantaneous cuff
pressure displays in place of the mean arterial
pressure and is denoted by the title Cuff.
This symbol provides information about the NIBP
audio alarm and the NIBP high/low alarm limit
settings. See Chapter 10, "Alarms" for more
information. Maternal alarms cannot be disabled.
Select the mode title to access the NIBP Setup
screen.
The clock symbol represents activation of the auto
mode. The countdown timer indicates the minutes
and seconds until the next automatic reading.
data.
2
NIBP Display
Description
Revision C