Advertisement
The VideoMate 7500XY is exported throughout the
world to countries with different mains voltages. The
projectors are set to a fixed mains voltage at the
factory.
120v Mains
Shipment to countries with 120v mains will be
equipped with a 4A fuse.
220, 230 or 240v Mains
Shipment to countries with 220, 230 or 240v mains will
be equipped with a 2A fuse.
Before you switch on your projector, make sure
that the voltage is correctly adjusted!
An incorrectly adjusted mains voltage can damage the
projector. The voltage indicator must show your
country's actual mains voltage.
1. Pull out the fuse link compartment by gripping the
small catch.
2. Push the fuse link into the compartment so that
the applied voltage can be seen in the window of
the compartment.
3. Push the loaded compartment (with mounting
underneath) firmly into the projector opening
provided.
For safety, the mains lead must be unplugged.
Make sure that the 120v setting uses a different fuse
that the 220/240v setting.
7
Advertisement
