Advertisement
10
RS-232 Control Port on Video Panel
The following pin connections are used for data
transmission:
Pin 2:
Transmit data TxD
Pin 3:
Receive data RxD
Pin 5:
Signal ground
8-pin Standard Projector Socket
This 8-pin remote control socket is only to be used for
wired or infrared remote control units.
Pin 1:
12 VDC/50mA
Pin 2:
Ground
Pin 3:
Signal 1 (LSB)
Pin 4:
Signal 2
Pin 5:
Signal 3
Pin 6:
Signal 4
Pin 7:
Signal 5 (MSB)
Pin 8:
Interrupt
Slide Change Time
0.8 seconds (independent of mains voltage and
frequency).
Slide Access Times
Less than 3 seconds for the longest search run.
Advertisement
