Advertisement
Adjusting the Horizontal Phase
1. Set the arrow " " to H PHASE by pushing the
MENU UP, MENU DOWN buttons.
2. Adjust the horizontal phase by pushing the DATA
UP, DATA DOWN buttons. The values range from
-99 to 99, DATA UP will increase the setting
towards 99 and DATA DOWN will decrease it
towards -99.
Coarse Adjustment of the Sub Carrier Phase
1. Set the arrow " " to SC 0/180 by pushing the
MENU UP, MENU DOWN buttons.
2. Select either 0 or 180 by pushing the DATA UP,
DATA DOWN buttons.
Adjusting the Sub Carrier Phase
1. Set the arrow " " to SC PHASE by pushing the
MENU UP, MENU DOWN buttons.
2. Adjust the sub carrier phase by pushing the DATA
UP, DATA DOWN buttons. The values range from
-99 to 99, DATA UP will increase the setting
towards 99 and DATA DOWN will decrease it
towards -99.
Option factory settings:
— 6 OPTION –-
OUTPUT1
OUTPUT2
NEGA/POSI
DTL OUT
SHADING
G SYNC
Use the MENU UP, MENU DOWN buttons to move the
arrow " " to the menu selection you want to set.
Then, push the DATA UP, DATA DOWN buttons to
adjust the setting.
RGB
VBS
POSI
OFF
OFF
ON
23
Advertisement
