Advertisement
20
Process factory settings:
— 4 PROCESS –-
GAMMA ON/OFF ON
GAMMA
BLACK GAMMA
2D LPF
DTL GAIN
DTL B. FREQ
M. PED
Changing the process mode settings
To select a process mode from the on-screen menu,
move the arrow " " by pushing the MENU UP, MENU
DOWN buttons. Once the arrow is set to the item you
want to change, you can adjust the settings in that
mode by pushing the DATA UP, DATA DOWN buttons.
Changing the gamma correction ON/OFF
1. Set the " " to GAMMA ON/OFF by pushing the
MENU UP, MENU DOWN buttons.
2. Select either ON or OFF by pushing the DATA UP,
DATA DOWN buttons.
When ON is selected, the menu will show the
GAMMA and BLACK GAMMA selections.
When OFF is selected, GAMMA, BLACK GAMMA
and 2D LPF selections disappear from the screen
and cannot be selected.
Changing the gamma correction level
1. Set the " " to GAMMA by pushing the MENU UP,
MENU DOWN buttons.
2. Adjust the gamma correction level by pushing the
DATA UP, DATA DOWN buttons. The correction
amount increases by pushing DATA UP and
decreases by pushing DATA DOWN. The correc-
tion level ranges from -10 to 10.
When GAMMA ON/OFF is set to OFF, the gamma
correction level cannot be adjusted.
00
NORM
ON
0
NORM
00
Advertisement
