Advertisement
24
Changing the OUTPUT1 output
1. Set the " " to OUTPUT1 by pushing the MENU
UP, MENU DOWN buttons.
2. Select either RGB or Y/PR/PB by pushing the
DATA UP, DATA DOWN buttons.
When Y/PR/PB is selected, the display G SYNC
turns off automatically and cannot be changed.
Changing the OUTPUT2 output
1. Set the " " to OUTPUT2 by pushing the MENU
UP, MENU DOWN buttons.
2. Select either VBS or Y/C by pushing the DATA UP,
DATA DOWN buttons.
Changing the Negative/positive inversion switch
1. Set the " " to NEG/POSI by pushing the MENU
UP, MENU DOWN buttons.
2. Select either NEGA (negative) or POSI (positive)
by pushing the DATA UP, DATA DOWN buttons.
Changing the detail signal output
1. Set the " " to DTL OUT by pushing the MENU UP,
MENU DOWN buttons.
2. Select either ON (only the detail signal is output)
or OFF (video signal output) by pushing the DATA
UP, DATA DOWN buttons.
Changing the shading
1. Set the " " to SHADING by pushing the MENU
UP, MENU DOWN buttons.
2. Select either ON or OFF by pushing the DATA UP,
DATA DOWN buttons.
When ON is selected, the automatic shading
correction can be performed by the MENU UP
button.
Changing the G SYNC
1. Set the " " to G SYNC by pushing the MENU UP,
MENU DOWN buttons.
2. Select either ON or OFF by pushing the DATA UP,
DATA DOWN buttons.
Advertisement
