Advertisement
26
To replace primary circuit fuses, proceed as follows:
1. Pull out the fuse link compartment by gripping the
small catch.
2. Replace the defective fuse.
3. Push the fuse link compartment back into the
projector. Do not change the position of the fuse
holder when reinserting it into the projector.
Please note that these fuses are different!
Two secondary fuses protect the projector against
damage caused by overloading the projector's remote
socket.
1. Turn the fuse carrier counterclockwise with a
screwdriver or coin.
2. Replace the defective fuse.
3. Screw the carrier, clockwise, back into position.
Advertisement
