Accessories; Warranty - Drill Master XP User Manual

4.

Accessories

Order accessories through our website: www.DrillDoctor.com,
or by contacting us at the phone number listed on the
Warranty page (page 31), or at the retailer where you
purchased your Drill Doctor.
3/32" to 3/4" Large Bit Chuck
3/32" to 1/2" Left-handed Bit Chuck
(for 3/32"-1/2" reverse twist drill bits)
Standard Diamond Sharpening Wheel Kit (180 grit)
Coarse Diamond Sharpening Wheel Kit (100 grit)
WARNING:
The use of any accessory other than one recommended in
this user's manual may present a risk of personal injury.
30
Remove worn wheel by twist-
ing slightly and lifting wheel
off shaft. Install new wheel
and reinstall wheel retainer
and screws. Don't over-tight-
en mounting screws. Remove
the wrench and replace the
Wheel Access Cover before
turning on the machine.
Part # DA70100PF
Part # DA02105PF
Part # DA31320GF
Part # DA31325GF
www.drilldoctor.com