Drill Master XP User Manual page 31

• Sharpened drill bits burn or turn blue no matter how
fast or slow you rotate the Chuck.
• When touching the Sharpening Wheel (with the
machine unplugged), the lower portion feels too
smooth (nonabrasive).
• When sharpening the drill bit, it takes too many half-
turns to sharpen.
Contact the store or dealer where you purchased the Drill
Doctor, ® or contact Drill Doctor
replacement Sharpening Wheel.
Reversing or Replacing Your Diamond
Sharpening Wheel
1.
Wheel Access Cover
2.
3.
www.drilldoctor.com
® directly, to purchase a
Unplug your Drill Doctor,
make sure machine is
cool, then remove wheel
cover.
Use wrench supplied with
your Drill Doctor to hold
sharpening wheel in place.
With Phillips-head screw-
driver, remove the two
screws and wheel retainer.
29