Table of Contents
Advertisement
Available languages
Available languages
Extension Cords
Make sure your extension cord is in good condition. When using an extension
cord, be sure to use one heavy enough to carry the current your product will
draw. An undersized cord will cause a drop in line voltage resulting in loss of
power and overheating. The Drill Doctor® has a 1.75 ampere rating (.4 ampere
in U.U.; .74 ampere in Japan). The following table shows the correct size to use
depending on cord length and nameplate ampere rating. If in doubt, use the
next heavier gauge. The smaller the gauge number, the heavier the cord.
Volts
120V
240V
More than Not more than
0
6
10
12
Safety Guidelines – Definitions
It is important for you to read and understand this manual. The information it
contains relates to protecting YOUR SAFETY and PREVENTING PROBLEMS.
The symbols below are used to help you recognize this information:
DANGER! Indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING! Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION! Indicates a potentially hazardous situation which, if not avoided,
may result in minor or moderate injury.
CAUTION! Used without the safety alert symbol (
hazardous situation which, if not avoided, may result in property damage.
The label on your tool may include the following symbols:
v........................
Hz.....................
Min...................
..................
.....................
.....................
www.drilldoctor.com
Save These Instructions
Minimum Guage Cord Sets
Total Length of Cord in Feet
0-25
(0 - 7.6m)
(7.6 - 15.2m)
0-50
(1 - 15.2m)
(15.2 - 30.4m)
Ampere Rating
6
10
12
16
volts
hertz
minutes
direct current
Class II Construction
safety alert symbol
26-50
51-100
(15.2 - 30.4m)
51-100
101-200
(30.4 - 60.9m)
American Wire Gauge
18
16
18
16
16
16
14
12
a........................
w.......................
......................
n o
......................
......................
rpm...................
101-200
(30.4 - 60.9m)
201-300
(60.9 - 91.4m)
16
14
14
12
14
12
Not recommended
) indicates a potentially
amperes
watts
alternating current
no load speed
earthing terminal
revolutions or
reciprocations per minute
7
Advertisement
Chapters
Table of Contents
