Fluke 5730A Sales Manual page 14

5730A Sales and Demo Guide
5730A General Specifications
Warm up time
Settling time
Standard interfaces
Temperature performance
Relative humidity
Operating Altitude
Safety
Guard Isolation
EMC
Line power
Power consumption
Calibration Documentation
Dimensions
Weight (w/o options)
Absolute accuracy definition
Specification confidence interval
Competitive Comparisons
Make/Model
Fluke 5730A/03
Fluke 5720A/03
Transmille 3010A
Meatest 142
Fluke 5522A
Fluke Corporation
Twice the time since last wamed up, to a maximum of 30 minutes
Less than 5 seconds for all function and ranges except as noted
IEEE-488 (GPIB), RS-232, USB 2.0 Device, Ethernet, 5725A, 52120A, phase lock in
(BNC), phase reference out (BNC)
Operating: 0 °C to 50 °C
Calibration: 15 °C to 35 °C
Storage: -40 °C to 75 °C
Operating: < 80% to 30 °C, < 70% to 40 °C, < 40% to 50 °C
Storage: < 95%, non-condensing
2000 m maximum
IEC 61010-1: 300 V CAT II, Pollution Degree 2
20 V
IEC 61326-1: Controlled
Line Frequency: 47 to 63 Hz; ± 10% 100V, 110V, 115V, 120V, 200V, 220V, 230V,
240V
300 VA
17025 accredited report of calibration included
Height: 17.8 cm (7 in), standard rack increment,
plus 1.5 cm (0.6 in) for feet
Width: 43.2 cm (17 in), standard rack width
Depth: 64.8 cm (25.5 in), overal; 59.4 cm (23.4 in), rack depth
27 kg (62 lb)
5730A accuracy specifications include stability, temperature coefficient,
linearity, line and load regulation, and the traceability of the external
standards used for calibration. You do not need to add anything to determine
the total accuracy of your calibrator for the temperature range indicated.
99%, 95%
ACV,
DCV,
ACV, output range output
output
accuracy
range
220 mV - 1100 V, 10
Hz - 1 MHz 42 PPM 0 - 1100 V 3.5 PPM
220 mV - 1100 V, 10
Hz - 1 MHz 45 PPM 0 - 1100 V 3.5 PPM
0 - 1020 V, 10 Hz -
500 kHz 150 PPM 0 - 1025 V 8 PPM
0 - 1000 V, 20 Hz -
100 kHz 180 PPM 0 - 1000 V 10 PPM
1 mV - 1020 V, 10 Hz
- 500 kHz 120 PPM 0 - 1020 V 9 PPM
Company Confidential
ACI,
DCV,
ACI, output
DCI, output
output
output
range
accuracy
accuracy
9 μA - 2.2 A,
10 Hz - 10
kHz 103 PPM 0 - 2.2 A
9 μA - 2.2 A,
10 Hz - 10
kHz 120 PPM 0 - 2.2 A
20 μA - 30 A,
10 Hz - 10 0 - 30 A
kHz 400 PPM (time limit) 50 PPM
1 μA - 30 A,
20 Hz - 10
kHz 500 PPM 0 - 30 A
29 μA - 20.5
A, 10 Hz - 30
kHz 350 PPM 0 - 20.5 A
DCI,
Resistance, output
output
range range
accuracy
0 to 100 MΩ, 18
35 PPM discrete
0 to 100 MΩ, 18
35 PPM discrete
0 Ω - 1000 MΩ
100 PPM 0 Ω - 1000 MΩ
80 PPM 0 MΩ- 1100 MΩ
Page 14 of 28
Resistance,
output
accuracy
6.5 PPM
8.5 PPM
8 PPM
100 PPM
22 PPM