Fluke 5730A Sales Manual page 10

5730A Sales and Demo Guide
Setup Menu
"Breadcrumb"
Move up 1 or
•
multiple levels
by simply
touching the
Menu level
desired
Yellow Font
•
indicates a
touchable item
Additional features displayed on the touchscreen include: instrument uncertainty displayed in % or
ppm in the top right of the screen, including the current specification interval and the last time since
the unit was calibrated, date and time, Operate/Standby status, Hazardous Voltage status, Phase
offset and Phase Lock status, Reference, Scale, and Offset values and error calculations, and
Auto/Locked range status.
The lifetime of the touchscreen display is dependent on the brightness level. At 50% brightness
Output
status
Secondary
Function
status
(default level), the screen is expected to last approximately 15 years and is actually quite bright.
Even at 0% brightness, the output is still viewable. There currently are no "screen saver" or time out
options as a blank screen could be a safety concern and the power would have to be removed from
Fluke Corporation
Calibration Specification Status (Touch ON/OFF)
Immediate Spec display in % or PPM
•
Specification Interval
•
Time since last calibration
•
Company Confidential
Easy to Edit
Touching an
•
existing value will
open a blank
space to input
new numbers
Date is password
•
protected to
prevent incorrect
cal dates
Touchable Keys are colored yellow
3 Ways to Adjust Phase
Manually using the number pad
•
Touch the value on the linear scale
•
Rotating the knob
•
Page 10 of 28