Table of Contents
Advertisement
Applications
In addition to local configuration, the RASFinder supports various applications that enable remote
viewing and changing of the configuration from anywhere on the connected internetwork. To manage
these applications, click Others on the Router Setup menu.
The Applications Setup dialog box appears.
Verify that the desired applications are enabled (checked). The default condition is all applications are
checked. To disable a given application, click to uncheck the check box and disable support.
For more information on using these remote configuration applications, click the on-line Help button
or refer to Chapter 7, Remote Configuration and Management.
Diagnostics
The RASFinder is equipped with a built-in diagnostics utility that can be accessed by a PC cabled
directly to the command port (remote users cannot access the diagnostics). Click the Built-in Test
button on the Router Setup menu and the Diagnostics dialog box is displayed.
In the Test Port group, select the either the WAN or Ethernet button you want to test. If you choose
the WAN button, you can then select a specific WAN port to test by highlighting the WAN number in
the drop down window. Click the Test button to start the test.
For additional details and parameters about specific fields in the Diagnostics dialog box, click the
on-line Help button.
RF300E/RF310E
Chapter 4 - RASFinder Software
71
Advertisement
Table of Contents
