Multitech RASFinder RF300E User Manual page 122

RASFinder RF300E/RF310E User Guide
Table of Contents
Section Description
D.1 AT Commands
D.1.1 Command Execution
D.1.2 General Information Commands
D.1.3 Network Configuration Commands
D.1.4 Serial Port Configuration Commands
D.1.5 General Configuration Commands
D.1.6 Digital (Data) Call Commands
D.1.7 Analog (Modem) Call Commands
D.2 S-Registers
D.3 Result Codes
D.4 Troubleshooting the TA Port
D.D.1 Specific Troubleshooting Situations
D.D.2 Debugging/Logging/Troubleshooting Commands
D.D.3 Debugging/Logging/Troubleshooting S-Registers
D.5 Test Commands
D.6 Factory Profiles
Table Section
D-1 D.1
D-2 D.2
D-3 D.3
D-4 D.D.2
D-5 D.D.3
D-6 D.5
D.1 AT Commands
The TA's command buffer can store 80 characters, including spaces and other characters used in
telephone numbers. If you mistype a command string, you can edit it by using the backspace or the
delete key, but only before you press <CR>. As you type a command string, it appears on your
monitor screen, letting you verify your input as you type it. D-1 lists the AT commands recognized by
the TA.
Table-1. AT Commands by Function (D.1.1)
AT
Return
+++AT<CR>
<BREAK>AT<CR>
General Information Commands (D.1.2)
In Display Product Information
Ln List Active Profile Information
!L Display Network Configuration
>MIBn Management Information Block (MIB) Information
Network Configuration Commands (D.1.3)
%A97=n Dialing Method
>A0=n Type of Coding
!C0=n Network Switch Type
!C6=n Data SPID
*!C6=n Voice SPID
122
Description
AT Commands by Function
S-Register Summary
Result Codes
Debugging/Logging/Troubleshooting Command Summary
Debugging/Logging/Troubleshooting S-Register Summary
Test Command Summary
Attention code
Command execution
In-band escape code
Out-of-band escape code
RF300E/RF310E