Multitech RASFinder RF300E User Manual page 58

Remote access server with v.90 modems or hybrid isdn ports
Table of Contents

Advertisement

RASFinder RF300E/RF310E User Guide
So, for this application to work, you need to set up a static route on the Corporate RASFinder of
192.168.2.220 which is pointing at the Internet router. You then need to go into the IP Port Setup
dialog box, select WAN tab, highlight WAN 3, and activate the Unnumbered Link option. Then do the
same thing for WAN 4. When you do this, the Port Address and the Remote Address groups become
inactive. Now, you need to check the PPP/SLIP button on the Main menu and ensure that the
Remote Port Setup group for WAN 3 and WAN 4 are set to Client or LAN.
Now go back to the IP Port Setup dialog box and hit on the Advance tab, then click on the Static
Routes button. This brings up a blank IP Static Routes dialog box, hit the Add button to bring up the
Static Routes Setup dialog box and when you enable the Unnumbered option, the Gateway Address
option becomes inactive.
Now, for the IP Address field we want the address of the Internet router on the Corporate LAN which
in our unnumbered example is 192.168.2.224. In order for the Manuals server on the Publications
network to appear on the Corporate LAN, we need to subnet the Manuals server with an Address
Mask of 255.255.255.224. The Port option identifies the WAN ports on the Corporate RASFinder that
are unnumbered. In our example, WAN 3 and WAN 4 are the unnumbered ports. So you would
develop the Static Routes Setup dialog with WAN 3 as the WAN port and establish a second Static
Routes Setup dialog with the only change from the above dialog box is that WAN 4 is the port
number.
When we click on the OK button for the second Static Routes Setup dialog box, the IP Static Routes
dialog box now displays two examples of static routes.
To complete the Static Route application, the Publications network RASFinder or router, depending
on the type of device used on the network would need a default route of 192.168.2.226 that is looking
at the Manuals Server. The Ethernet port IP address could be 192.168.2.225 with a net mask of
255.255.255.224.
58
RF300E/RF310E

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rasfinder rf310e

Table of Contents