Table of Contents
Advertisement
RASFinder RF300E/RF310E User Guide
D.1.1 Command Execution
Command:
AT
Function:
Attention Code
Unit:
n/a
Values:
n/a
Default:
n/a
Description:
This attention code precedes all command strings except the A/ command and
escape codes.
Command:
RETURN or ENTER
Function:
Command Execution
Unit:
n/a
Values:
n/a
Default:
n/a
Description:
Press the RETURN (ENTER) key to execute a command. The RETURN key is
frequently abbreviated <CR> in command examples.
Command:
+++AT<CR>
Function:
In-Band Escape Code
Unit:
ASCII
Values:
Set by S-register S2
Default:
+ (S2=43)
Description:
The +++AT<CR> command causes the TA to enter command mode, without
disconnecting the call, when it is online with a remote device. The default escape
code is three + characters, followed by the letters AT, up to 80 command characters,
and a RETURN (press ENTER). The TA escapes to command mode, executes any
commands in the string, and then remains in command mode. Use the S2=n
command to change the escape character.
Command:
<BREAK>AT<CR>
Function:
Out-of-Band Escape Code
Unit:
n/a
Values:
n/a
Default:
n/a
Description:
This command places the TA in command mode while remaining online. Enter a
break signal, the letters AT, up to 80 command characters, and a RETURN (press
ENTER).
D.1.2 General Information Commands
Command:
In
Function:
Display Product Information
Unit:
Decimal ASCII code
Values:
n=0—Product ID (e.g. 247)
n=1—Firmware version number (e.g. 1.02)
n=2—Product model
n=3—Product features
n=4—Date and time firmware was generated
n=8—Current settings used by Windows for descriptor identification
n=9—Product name
n=11—Digital Port Connection Information
n=12—Analog Port Connection Information
n=20—Extended Product name
n=99—Crystal frequency
124
RF300E/RF310E
Advertisement
Table of Contents
