Connection Examples - Siemens SINAMICS S120 Manual

Encoder system connection
9.11 Sensor Module External SME125
Note
Only MOTION-CONNECT DRIVE-CLiQ cables may be used for connections. The maximum cable
length is 100 m for MOTION-CONNECT 500, and 75 m for MOTION-CONNECT 800PLUS cables.
9.11.4

Connection examples

Cable can be ordered from the manufacturer of the linear scale
1)
Maximum encoder cable length, see diagram in Chapter "Technical data"
2)
Maximum cable length between SME and motor connection: 10 m
3)
Figure 9-48 Connecting motor encoders via SME for motors without a DRIVE-CLiQ interface and molded connecting cables
with terminated cable ends
304
Control Units and additional system components
Equipment Manual, 06/2020, 6SL3097-5AH00-0BP2