Garmin G1000 System Maintenance Manual page 85

4. A screen similar to the one shown below will appear. The numbers shown are for example only.
5. Click on the download symbol for the appropriate Sensor and Main software version part
numbers based upon the information provided in Garmin GA Drawing 005-00421-03 and save
the files to the local hard drive.
A standard USB-A plug to USB-B plug commercial cable (not provided) is required to interface
between a personal computer USB-A receptacle and the GRA 5500 USB-B receptacle installed in
the wiring harness.
3.28.2 Downloading and Installing the GRA 5500 Retrofit Installation Tool
GRA 5500 configuration, calibration, diagnostics, and software upgrades are performed (in retrofit/non-
GIFD installations) using a personal computer (installed with Microsoft Windows XP or later) and the
GRA 5500 Retrofit Installation Tool, Garmin part number 006-A0451-00. This tool is also used to assist
in the diagnosis and resolution of asserts found in the GRA 5500 assert log during the installation process
and during post-installation flight operation. The tool is available for download from the Dealer Resource
Center portion of the Garmin website (www.garmin.com). See the accompanying "readme" file in the
tool's installation directory for the latest instructions.
A standard USB-A plug to USB-B plug commercial cable (not provided) is
required to interface between a personal computer USB-A receptacle and the
GRA 5500 USB-B receptacle installed in the wiring harness.
Installation
1. Once downloaded, launch the installation file from the directory in which it is stored (or use the
web browser's download shortcuts).
2. The GRA 5500 Retrofit Installation Tool Setup Wizard will begin.
3. Click "Next" as prompted by the setup wizard, and adjust any settings (e.g. installation directory)
as needed.
4. The last screen of the setup wizard will show "Installation Complete." Click the "Close" button to
close the setup wizard.
G1000 / GFC 700 System Maintenance Manual - 300/B300 Series King Air
190-00716-01
NOTE
NOTE
Page 3-43
Revision 4