Gsr 56 Satellite Receiver With Gdl 59 Wi-Fi Data Link Option Configuration - Garmin G1000 System Maintenance Manual

3.16 GSR 56 Satellite Receiver with GDL 59 Wi-Fi Data Link Option
Configuration
Follow this procedure to enable the optional GSR 56 Satellite Receiver with GDL 59 Wi-Fi data link
function.
If the GSR 56 option is reloaded for any reason and the airplane is configured
with a GDL 59, the GDL 59 option must also be reloaded per Section 3.15.
Coordinate the GSR 56 configuration with Section 7.30 "GSR 56 Satellite
Receiver Functional Check".
1. With the loader card in the top slot of PFD1 and PFD1 in configuration mode, select the
"SYSTEM UPLOAD" page using the small FMS knob on PFD1.
2. Activate cursor and rotate the small FMS knob to display the drop down menu. Rotate the small
FMS knob to highlight "King Air – Garmin Options" and press ENT key on PFD1.
3. Rotate the small FMS knob to highlight "King Air – GSR 56 with GDL 59". Press ENT key on
PFD1.
4. Verify "King Air – GSR 56 with GDL 59" is displayed in the "Item" window. Press "LOAD"
softkey.
5. Monitor load progress. Verify software load completes without errors as indicated by the
following:
•
Green "PASS" in Configuration and Software columns for each item loaded
•
"Upload Complete.............COMPLETE" in the summary box.
6. Press ENT key on PFD1 to acknowledge upload complete.
7. Deactivate cursor.
Page 3-30
Revision 4
NOTE
G1000 / GFC 700 System Maintenance Manual - 300/B300 Series King Air
190-00716-01