Modem Configuration Screen - Pots Modem - Multitech FaxFinder FF110 Administrator User Manual

Modem Configuration Screen – POTS Modem
"Modem Configuration: POTS Modem" Screen Field Definitions
Field Name
Answer On
Max Baud Rate
Tone Dial
Dial Prefix
Multi-Tech Systems, Inc.
Values Description
number of rings This setting determines the number of rings after
which an incoming fax call to the POTS modem
will be answered. Default = 2.
2400 – 33,600 bps The value in this field determines the maximum
baud rate used for fax calls on the POTS
modem. It is typically set at less than 33,600 bps
only if there are quality problems with the phone
line.
on, off Set this field to "on" if your POTS line supports
tone (DTMF) dialing. Set this field to "off" if the
POTS line supports rotary dialing only.
Default = on.
Numeric string, When the FaxFinder is used on a phone line in a
5 characters, max. PBX or key system, this is the digit that must be
Use of a comma is dialed to access an outside line (that is, a line on
optional. The the PSTN rather than extensions of the PBX or
comma denotes a key telephone system). The digit "9" is most
brief delay to frequently used.
establish dial tone If "9" is specified in this field, clients will not need
for an outside line. to include the "9" in the individual entries in their
address books or when 'Adding Recipients' in the
FaxFinder Send Fax screen.
The FaxFinder administrator must inform clients
as to whether they must include or omit the "9"
when entering fax numbers.
FF110 FaxFinder Fax Server Admin User Guide
Chapter 4: FaxFinder Server Software Screens
52