Multitech FaxFinder FF110 Administrator User Manual page 53

"Modem Configuration: POTS Modem" Screen Field Definitions (cont'd)
Field Name
Fax Debugging
Extra Init String
Fax ID
Error Correction
Smart Dial
Multi-Tech Systems, Inc.
Values Description
on, off This field allows you to turn on or off a fax
debugging feature. When Fax Debugging is on,
the FaxFinder produces detailed technical
reports on failed faxes. Generally, this feature is
for use by the user in conjunction with MultiTech
tech support personnel. This feature helps to
identify and clarify unusual or difficult problems
that may occur.
In this field, the administrator can enter AT
commands that the FaxFinder modem will
implement each time the modem is initialized
(between each fax call).
alphanumeric; The value in this field will be printed at the top of
20 characters, each page of the transmitted fax. The value in
max. this field is usually the phone number of the line
to which the POTS modem is attached.
However, any alphanumeric string up to 20
characters is allowed. Sometimes company
names or abbreviations are included in this
string. Some governments may require that the
originating phone number be printed on each fax
page.
on, off By setting Error Correction to "on," you are
requesting that faxes be sent in an error-free
condition, which can be achieved only if the
remote fax machine with which you are
communicating also supports Error Correction
and has this feature enabled. The Error
Correction feature slows down fax transmissions.
If you are operating at speeds below 16,800 bps,
you can set Error Correction "off" to achieve
faster transmissions of faxes, although the
quality of the fax transmissions may be
compromised. However, if you have set the fax
baud rate to 16,800 bps or higher, then error
correction is automatically enabled.
Default = on.
on, off If set to "on," the POTS modem will detect dial
tones and busy signals. If 'no dial tone'
messages appear consistently, the Smart Dial
feature may be having difficulty detecting PBX
dial tone. In such cases, set Smart Dial to "off."
Default = on.
FF110 FaxFinder Fax Server Admin User Guide
Chapter 4: FaxFinder Server Software Screens
53