Multitech FaxFinder FF110 Administrator User Manual page 51

"Modem Configuration: DID Modem" Screen Field Definitions (cont'd)
Field Name
Fax Debugging
Extra Init String
DID Start
Error Correction
Update (button)
Multi-Tech Systems, Inc.
Values Description
on, off This field allows you to turn on or off a fax
debugging feature. When Fax Debugging is on,
the FaxFinder produces detailed technical
reports on failed faxes. Generally, this feature is
for use by the user in conjunction with MultiTech
tech support personnel. This feature helps to
identify and clarify unusual or difficult problems
that may occur.
In this field, the administrator can enter AT
commands that the FaxFinder modem will
implement each time the modem is initialized
(between each fax call).
wink, The "DID Start" value denotes the type of DID
immediate, line that the telco is providing. "Wink" is the most
delay dial common type of signaling for DID lines.
Default = wink.
on, off By setting Error Correction to "on," you are
requesting that faxes be sent in an error-free
condition, which can be achieved only if the
remote fax machine with which you are
communicating also supports Error Correction
and has this feature enabled. The Error
Correction feature slows down fax transmissions.
If you are operating at speeds below 16,800 bps,
you can set Error Correction "off" to achieve
faster transmissions of faxes, although the
quality of the fax transmissions may be
compromised. However, if you have set the fax
baud rate to 16,800 bps or higher, then error
correction is automatically enabled.
Default = on.
-- If you have changed the values of any fields on
this screen, you must click Update to implement
those changes.
FF110 FaxFinder Fax Server Admin User Guide
Chapter 4: FaxFinder Server Software Screens
51