Multitech FaxFinder FF110 Administrator User Manual page 41

Field Name
System fields group
Time Server
Status
Up Time x days yy hours: zz minutes
Email Status
Mail Server Connect Failed,
DID Modem fields group
State Waiting for Ring,
Initializing Modem,
Waiting for Connect,
Negotiating, Receiving
Page, Postpage Processing,
Processing, Busied Out
Baud Rate 2400, 4800, 7200, 9600,
12000, 14400, 16800,
19200, 21600, 24000,
26400, 28800, 31200, 33600
bps
Connect Time mm/dd/yyyy,
hh:mm:ss
Phone Number numeric
Page numeric
Width numeric, in pixels
Elapsed Time numeric
Name alphanumeric
Vertical standard, fine
Resolution
Length letter, legal, or variable
Remote ID numeric (phone number) or
alphanumeric
Initialize
Modem
(button)
Make Busy
(button)
Multi-Tech Systems, Inc.
Current Status Screen Field Definitions (cont'd)
Values
Initializing,
No Errors,
SNTP Error: type
No Errors,
Bad MailServer Address,
SMTP Invalid Response,
SMTP Client Timeout
FF110 FaxFinder Fax Server Admin User Guide
Chapter 4: FaxFinder Server Software Screens
Description
The FaxFinder synchronizes its fax time stamps
to an Internet source, usually a government
standards site. It will attempt contact with the
standards web site 5 times in 20 seconds. If
contact fails, it will try 5 times again 5 minutes
later. If contact succeeds, the FaxFinder will
update its stamping time periodically per an
interval set in the Administration screen.
Operation time since last reboot.
Indicates whether the FaxFinder's email
transmissions, both faxes and administrative
messages, are proceeding with or without errors.
Indicates the modem's current operating
condition.
The data transmission speed in bits per second
at which the current fax transmission is
occurring.
For the current fax, the date and time at which
the connection began.
For inbound faxes received through the DID
modem, this is the number that the remote fax
sender dialed when sending the fax.
For the current fax, this indicates the page
number currently being received. "0" indicates
that no fax is currently being sent or received.
Width of received fax.
The duration of the current fax transmission in
seconds.
Name of person to whom the incoming fax will be
routed.
Horizontal resolution is 204 bpi. Vertical
resolution can be either 98 bpi (standard) or 196
bpi (fine).
Length, in paper size, of the received fax.
The fax number or other identifier for the off-
premises fax machine that sent this fax.
Initializes the DID modem, clearing a busied-out
state. This can only be done by a user with
administrative rights.
Imposes a busied state on the DID modem. This can
only be done by a user with administrative rights.
41