Table of Contents
Advertisement
Re-entering the server serial number and product ID
Re-entering the server serial number and product ID
After you replace the system board, the server serial number and the product ID must be configured:
Procedure
Procedure
1. Access System Utilities. During POST, press F9.
2. On the System Utilities home screen, select System Configuration > BIOS/Platform Configuration (RBSU) > Advanced Options >
Advanced Service Options.
3. Select the Serial Number field and press Enter.
The following alert appears:
The serial number is modified by qualified service personnel and must match the serial
number located on the chassis.
4. Click OK.
5. Type the serial number and press Enter.
6. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > Date and Time.
7. Select a setting, and then complete your entry:
Date (mm-dd-yyyy)—Enter the date in a month-day-year (mm-dd-yyyy) format.
Time (hh:mm:ss)—Enter the time in a 24-hour format (hh:mm:ss) format.
Time Zone—Select your current time zone for the system.
Daylight Savings Time:
Enabled—Adjusts the local time displayed by one hour for Daylight Savings Time.
Disabled—Does not adjust the local time displayed for Daylight Savings Time.
Time Format
Coordinated Universal Time (UTC) — Calculates the time stored in the hardware Real Time Clock (RTC) from the associated
Time Zone setting.
Local Time—Removes the use of the Time Zone setting.
This option is useful for addressing interaction issues between Windows operating systems set in Legacy BIOS boot mode.
8. Save your settings.
9. Select the Product ID field and press Enter.
The following alert appears:
Product ID is modified only by qualified personnel. This value must match the product
ID located on the chassis.
10. Type the product ID and press Enter.
11. Press F10
F10 to save the configuration.
The procedure is complete.
Re-entering the server serial number and product ID
203
Advertisement
Table of Contents
Troubleshooting
