Removing And Replacing The Lff Backplane Assembly - HP Enterprise ProLiant DL380 Gen10 Maintenance And Service Manual

Removing and replacing the LFF backplane assembly

Removing and replacing the LFF backplane assembly
Procedure Procedure
1. Power down the server (Power down the server).
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
Extend the server from the rack ( Extend the server from the rack ).
Remove the server from the rack ( Remove the server from the rack ).
4. Remove the access panel ( Remove the access panel ).
5. Remove the fan cage (Removing and replacing the fan cage ).
6. Remove all drives ( Removing and replacing drives ).
7. Disconnect all cables connected the LFF backplane assembly.
8. Remove the LFF backplane assembly.
To replace the component, reverse the removal procedure.
Removing and replacing the LFF backplane assembly 167