Smart Carrier Nvme (Scn) Drive Led Definitions - HP Enterprise ProLiant DL380 Gen10 Maintenance And Service Manual

Smart Carrier NVMe (SCN) drive LED definitions

Smart Carrier NVMe (SCN) drive LED definitions
The NVMe drive is a PCIe bus device. A device attached to a PCIe bus cannot be removed without allowing the device and bus to
complete and cease the signal/traffic flow.
CAUTION: Do not remove an NVMe drive from the drive bay while the Do not remove LED is flashing. The Do not CAUTION:
remove LED flashes to indicate that the device is still in use. Removing the NVMe drive before the device has completed
and ceased signal/traffic flow can cause loss of data.
Item Item LED LED Status Status
1 Locate Solid blue
Flashing blue
2 Activity Rotating green
ring
Off
3 Drive Solid green
status
Flashing green
Flashing
amber/green
Flashing amber
Solid amber
Off
4 Do not Solid white
remove
Flashing white
Off
5 Power Solid green
Flashing green
Off
Definition Definition
The drive is being identified by a host application.
The drive carrier firmware is being updated or requires an update.
Drive activity
No drive activity
The drive is a member of one or more logical drives.
The drive is doing one of the following:
Rebuilding
Performing a RAID migration
Performing a stripe size migration
Performing a capacity expansion
Performing a logical drive extension
Erasing
The drive is a member of one or more logical drives and predicts the drive will
fail.
The drive is not configured and predicts the drive will fail.
The drive has failed.
The drive is not configured by a RAID controller.
Do not remove the drive. The drive must be ejected from the PCIe bus prior to
removal.
The drive ejection request is pending.
The drive has been ejected.
Do not remove the drive. The drive must be ejected from the PCIe bus prior to
removal.
The drive ejection request is pending.
The drive has been ejected.
Smart Carrier NVMe (SCN) drive LED definitions 254