Removing And Replacing A Type -A Smart Array Controller - HP Enterprise ProLiant DL380 Gen10 Maintenance And Service Manual

Removing and replacing a type -a Smart Array Controller

Removing and replacing a type -a Smart Array Controller
Procedure Procedure
1. Power down the server (Power down the server).
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
Extend the server from the rack ( Extend the server from the rack ).
Remove the server from the rack ( Remove the server from the rack ).
4. Remove the access panel ( Remove the access panel ).
5. Do one of the following:
Remove the air baffle ( Removing the air baffle ).
Remove the 4 LFF midplane cage ( Removing and replacing a 4 LFF midplane cage ).
6. Disconnect the SAS cables.
7. Remove the controller.
To replace the component, reverse the removal procedure.
Removing and replacing a type -a Smart Array Controller 197