Removing And Replacing The 2 Sff Rear Drive Bay And Riser Cage - HP Enterprise ProLiant DL380 Gen10 Maintenance And Service Manual

Removing and replacing the 2 SFF rear drive bay and riser cage

Removing and replacing the 2 SFF rear drive bay and riser cage
Procedure Procedure
1. Power down the server (Power down the server).
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
Extend the server from the rack ( Extend the server from the rack ).
Remove the server from the rack ( Remove the server from the rack ).
4. Remove the access panel ( Remove the access panel ).
5. Remove all drives ( Removing and replacing drives ).
6. Disconnect all cables from the drive backplane.
7. Remove the drive cage.
To replace the component, reverse the removal procedure.
Removing and replacing the 2 SFF rear drive bay and riser cage 162