Teledyne T3PM1100 User Manual page 83

Find Quality Products Online at:
8. Press down arrow key to move to
Select integrator
measurement the bottom half section where
parameter measured values are displayed.
9. Press Enter button to enter the 1st
minor parameter followed by using
up and down arrow keys to switch to
preferred measurement parameter.
Press Enter button again to confirm
the selection.
Press left or right arrow keys to
move to the 2nd minor parameter
followed by using the steps above
to select a preferred parameter.
GlobalTestSupply
www.
MEASUREMENT AND OTHER FUNCTIONS
.com
Enter
Enter
83
sales@GlobalTestSupply.com