Teledyne T3PM1100 User Manual page 27

Find Quality Products Online at:
2. Use up and down arrow keys to
select the desired range.
3. Press Enter button to confirm your
selection.
Available range Crest Factor
is 3:
Crest Factor
is 6/6A:
When it is under the manual setting ranging from
Note
5mA to 200mA, the manual range adjusts to auto
range automatically if input current exceeds 700mA.
When the measurement range is set manually, if the
Note
range status icon lights in green, the measured value
meets the setting range. On the contrary, if the range
status icon lights in red, the measured value doesn't
meet the best setting range. In this case, it is better to
switch to another range to get more accurate
measurement results.
The P.I status icon lights in red when the current
Note
measurement circuit detects that the measured value
exceeds setting range by 3 folds (CF is set to 3) or 6
folds (CF is set to 6/6A).
GlobalTestSupply
www.
BASIC SETTING
AUTO, 5mA, 10mA, 20mA, 50mA,
100mA, 200mA, 0.5A, 1A, 2A, 5A, 10A,
20A
AUTO, 2.5mA, 5mA, 10mA, 25mA,
50mA, 100mA, 250mA, 0.5A, 1A, 2.5A,
5A, 10A
.com
Enter
27
sales@GlobalTestSupply.com