Connecting The Inputs And Outputs (Channels 2 To 4) - Siemens SITRANS F Series Compact Operating Instructions

Connecting
4.2 Connecting MASS 2100/FC300
7. Connect ground to terminal
shown below at right using a screwdriver.
Note
The terminal box is detachable
For easier access unplug the terminal box. After connecting the wires, plug the terminal box
back in.
8. Tighten cable gland.
9. Mount power supply protection cover and fasten protection cover screw.
4.2.3.5

Connecting the inputs and outputs (channels 2 to 4)

1. Remove cap and ferrule from cable gland and slide onto cable.
2. Push cable through open gland and cable path.
3. Restore ferrule and tighten cap to lightly hold cable in place.
4. Fold signal cable screen back over outer sheath and ground beneath cable clamp.
40
①
L/+
②
N/-
③
Protective Earth (PE)
AC connection
Power: 100 to 240 V AC, 47 to 63 Hz
and power supply to terminals L/+ and N/- in the manner
Compact Operating Instructions, 05/2020, A5E40533698-AC
DC connection
Power: 20 to 90 V DC
SITRANS MASS 2100 & FC300 (FCT030)