10. Dispose of the battery as required by local ordinances or regulations. See
Installing the battery
The following notes describe information that you must consider when replacing the
battery in the server.
v After you replace the battery, you must reconfigure the server and reset the
v To avoid possible danger, read and follow the following safety statement.
IPMB
connector
S
lot 1
PCI 33 MHz
S
lot
2 PCI 33 MHz
Battery
connector
SATA 0
SAS
channel A
SAS
channel B
9. Remove the battery:
a. Use a fingernail to press the top of the battery clip away from the battery.
The battery pops up when released.
b. Use your thumb and index finger to lift the battery from the socket.
"Battery return program" on page 118 for more information.
system date and time.
Slot 3 PCI Express x8
Slot 4 PCI Express x8
Chapter 4. Removing and replacing server components
DIMM 6
DIMM 5
DIMM 4
DIMM 3
DIMM 2
DIMM 1
Microprocessor 1
connector
Microprocessor 2
connector
59