Ransomes MT503 Quick Start Manual page 24

QUICK START GUIDE
VISUAL DISPLAY
WARNING MAXIMUM SLOPE
ANGLE EXCEEDED
If the slope angle reaches the Safe Working
Angle for the machine this warning will be
displayed and the audible alarm will sound
once.
This warning will self-clear (i.e. the operator
does not need to press Button 4 to clear it)
if the vehicle angle decreases before either
an Inhibit Cut or Stop Cut warning has been
triggered. The angle at which this warning
occurs varies with machine configuration as
follows:
• MT503 with ROPS – 19°
• MT503 with Cab – 16°
en-24
20
1/1
WARNING SLOPE ANGLE – INHIBIT CUT
If the slope angle continues to increase the
screen will display this warning which
indicates that the cutters will be prevented
from starting if not already running, or re-
started if running then stopped. An audible
warning will be sounded 4 times at 4 second
intervals.
This will continue until the machine has been
driven to an area with a shallower slope
angle. The warning screen and the audible
alarm will self-clear as the vehicle angle
decreases (i.e. the operator does not need to
press Button 4 to clear it). The angle at
which this warning occurs varies with
machine configuration as follows:
• MT503 with ROPS – 21°
• MT503 with Cab – 19°
22
1/1