Table of Contents
Advertisement
QUICK START GUIDE
DRIVING
1.
Release Brake - Make sure the Park
Brake is released before you try to go
forward or reverse.
Forward - Carefully push the top (A) of
2.
the Forward / Reverse Foot Pedal to
reach correct ground speed.
3.
Reverse - Carefully push the bottom (B)
of the Forward / Reverse Foot Pedal to
reach correct ground speed.
4.
To Stop - Carefully return the Forward/
Reverse Foot Pedal to the neutral
position.
5.
To hold the vehicle stopped on a slope
it can be necessary to apply an amount
of forward or reverse traction.
NOTE:
•
Use complete foot to operate both
forward and reverse.
•
Unless in an emergency, do not move
the pedal suddenly, always operate
slowly and carefully.
Do not move the pedal with force from
forward to reverse or reverse to
forward.
•
The angle of the Foot Pedal can be
altered to obtain the most comfortable
angle for long periods of operation. This
can be achieved by repositioning
screws (D) as required.
•
The foot should always be kept firmly on
the pedal to maintain full control of the
drive pedal.
en-10
A
C
MOW/TRANSPORT DRIVE MODES
Modes set by screen covered on (Page 16)
!
CAUTION
The foot should always be kept firmly on
the pedal to maintain full control of the
drive pedal.
B
Advertisement
Table of Contents
