MOWING
1.Ensure speed limiter (C) is pushed forward
in Mow position.
2.Lower the implement with the Unit Lift/
Lower Control.
NOTE:
The cutters cannot be started if, the speed
limiter (C) is set to Transport position.
3.Engage the cutter by pushing on the upper
half of the Cutter Switch (PTO).
4.Release the Park Brake and begin driving
forward.
NOTE:
Always set the throttle to full engine speed for
mowing, even when the grass is heavy.
When the engine is labouring, reduce
forward speed by easing back on the
Forward / Reverse Foot Pedal. A
performance indicator lamp on the control
pod will illuminate red as the cutting
implements starts to labour.
QUICK START GUIDE
A
C
B
en-11