Virtual Sound Check 虚拟声音核查 - PRESONUS StudioLive III Series Owner's Manual

8 SD Recording
8.4 Virtual Sound Check
8.4 Virtual Sound Check 虚拟声音检测
We've all been there. The drummer is stuck in traffic. The guitarist is stuck at work.
And you're stuck at front-of-house (FOH) with a hyped up lead singer and bass player
and no way to dial in a front-of-house mix, let alone set up the singer's in-ear mix.
Don't panic! With Capture's Virtual Soundcheck mode, dialing a good rough mix
without the band—or with half the band missing— is quick and simple.
我们都经历过这种情况。鼓手，吉他手被堵在路上或困在工作中。而你在前厅
（FOH），有一个主唱和贝斯手，却没有办法拨入front-of-house mix混音，更
不用说为主唱设置入耳式混音。 不要惊慌!
1. To begin, create a new Session, press the Soundcheck button on your
StudioLive mixer.
要开始，创建一个新的会话，按StudioLive调音台的Soundcheck按
钮。
2. This will launch the Load Session screen. Select the previously
recorded session you would like to use for your Virtual Soundcheck.
这将启动Load Session。选择先前录制的片段，用于虚拟试音。
3. The Recall button will begin to flash. Press the Recall button to load the
saved Session. This will also engage all the SD channel returns.
按Recall键，开始闪烁，加载已保存的会话。使所有的SD 频道返回。
4. Your mixer scene is automatically saved with your Capture session. Enabling
the Load Mix function will load the saved StudioLive mix scene as well.
你的混音场景会随着你的 Capture 会话自动保存。启用Load Mix 功能，会加载
保存 StudioLive 混音场景。
5. Use the Transport controls to playback the recorded audio and dial in your mix.
使用Transport controls来回放录制的音频，并拨入你的混音。
6. When you have finished setting up your mix, press the Soundcheck button again
to exit. This will close the Capture session and disengage all the SD returns on
your StudioLive, leaving the track labels on your mixer.
当你完成混音设置后，再次按下Soundcheck按钮退出。这将关闭Capture会
话，并解除 StudioLive 上所有的SD返回，留下混音器上的track labels标签。
StudioLive™ Series III
Owner's Manual
78