Recording An Audio Track; Adding Virtual Instruments And Effects - PRESONUS Revelator io24 Owner's Manual

8 Studio One Artist Quick Start Guide
8.3 Creating a New Song
8.3.3

Recording an Audio Track

8.3.4

Adding Virtual Instruments and Effects

Opening the browser.
1. To begin recording, create an audio track from the Add Tracks window, set its input
to Input 1 on your Revelator io24, and connect a microphone to the same input.
2. Select Record Enable on the track. Turn up the Input 1 level on your
Revelator io24 while speaking/singing into the microphone. You should
see the input meter in Studio One Artist react to the input. Adjust the gain
so the input level is near its maximum without clipping (distorting).
You are now ready to start recording. For complete instructions, please consult the
Studio One Reference manual located in Help | Studio One Reference Manual.
You can add plug-ins and instruments to your Song by dragging-and-dropping
them from the browser. You can also drag an effect or group of effects from one
channel to another, drag in customized effects chains, and instantly load your
favorite virtual-instrument preset without ever scrolling through a menu.
In the lower right corner of the Arrange window are three buttons:
The Edit button opens and closes the audio and MIDI editors.
•
The Mix button opens and closes the Mixer window.
•
The Browse button opens the browser, which displays all of the
•
available virtual instruments, plug-in effects, audio files, and MIDI files,
as well as the pool of audio files loaded into the current session.
Revelator io24
Owner's Manual
72