Scene Safe 场景安全; Autostore 自动存储 - PRESONUS StudioLive III Series Owner's Manual

9 Master Control
9.6 Scenes and Projects
9.6.5 Scene Safe 安全
Ch 2 Ch 4
2 3
Prev Next
AutoStore 自动存储
9.6.6
In some cases, you may want to protect a channel or bus from being affected when
scenes are recalled. To do this, touch the Scene Safe button. This opens the Scene
Safe screen on the Touch Display.
在某些情况下，你可能想保护一个通道或总线在场景被调用时不被影响。要
做到这一点要按 "Scene Safe" 键。这将Touch Display上的 "Scene Safe"图像。
This screen shows you a list of all available channels and buses. Touch the channel or
bus of your choice to put it into scene safe mode, and protect it from changes when
scenes are recalled.
这个屏幕显示所有可用的通道和总线的列表。触控你选择的通道或总线，使其
进入scene safe模式，并保护其在调用场景时不被改变。
When a channel is included in the Scene Safe group, a padlock will appear on its
scribble strip to alert you that it will be omitted from any Scene that is recalled.
在Scene Safe组中有一个通道时，一个padlock会出现在它的scribble strip条上
，提示它将从任意被调用的场景中省略。
It is not necessary to create a scene for your StudioLive in order to preserve its
settings when you power it down. The StudioLive takes continuous snapshots of the
current position of every parameter on the mixer and stores them to memory every
3 seconds. This ensures that the next time you turn your StudioLive on, all of your
settings will be restored to the same setting they were in when you powered down.
不是必须给你的StudioLive创建一个场景，以便在关闭电源时保留其设置。
StudioLive对调音台上的每个参数的当前位置，进行连续快照，每隔3秒会存储
到内存中。保证你下次打开StudioLive时，所有的设置都将恢复到你关机时的设
置。
The AutoStore to Disk icon will flash in the upper left-hand corner of the Touch
Display when an AutoStore snapshot is taken, alerting you that it is safe to power
down your mixer.
当 AutoStore自动存储快照时，自动存储到磁盘的图标，将在Touch Display
左上角闪烁，提示关闭调音台电源是安全的。
Note: If you make changes to a stored scene,AutoStore will not save these changes as
a permanent part of the scene. Any changes made to a scene in the StudioLive's library
must be saved using the Scene menu, as described in the first part of this section.
注意：如果你修改了存储的场景， AutoStore 不会将这些修改保存为场景的永久
部分。对 StudioLive 库中的场景所做的任何修改，都必须使用 Scene menu 场景菜
单来保存，如本节第一部分所述。
StudioLive™ Series III
Owner's Manual
95