Basic Operations (Rm-Rk258); Searching For A Station Directly - JVC KW-M785BW Instruction Manual

Remote Controller Remote Controller
WARNINGS
Do not ingest the battery, Chemical Burn Hazard.
The remote controller supplied with this product
contains a coin/button cell battery.
If the coin/button cell battery is swallowed, it can
cause severe internal burns in just 2 hours and can lead
to death.
Keep new and used batteries away from children.
If the battery compartment does not close securely,
stop using the product and keep it away from children.
If you think batteries might have been swallowed or
placed inside any part of the body, seek immediate
medical attention.
CAUTION
• Do not leave the remote controller in hot places such
as on the dashboard.
• Risk of the fire of explosion if the battery is replaced
by an incorrect type. Ensure to replace only with the
same type.
• Risk of fire, explosion or the leakage of flammable
liquid or gas if the battery is left in an extremely
high temperature surrounding environment and/
or subjected extremely low air pressure. The battery
pack or batteries shall not be exposed to excessive
heat such as sunshine, fire or the like.
• Risk of fire, explosion or the leakage of flammable
liquid or gas if the battery is disposed into fire or a
hot oven, recharged, shorted, mechanically crushed
or cut of the battery.
• If spilled fluid comes in contact with your eyes or on
clothing, immediately rinse with water and consult
a physician.

Basic operations (RM-RK258)

VOL +/VOL – Adjusts the volume level.
SRC Selects the source.
ATT Attenuates/restores the sound.
DISP Not used for this unit.
J K
FM/ /AM/ • Selects the band.
• Selects an item/folder.
• Searches for stations automatically.
/
(Press)*
• Searches for stations manually.
(Hold)*
• Selects a file. (Press)
I W
/ • Starts/pauses playback.
• Changes the seek mode:
AUTO1, AUTO2, MANU.
ANGLE Not used for this unit.
Answers incoming calls.
DIRECT Enters direct search mode.
ASPECT Changes the aspect ratio.
• To check the current aspect ratio
setting, operate on the touch panel
(pages 19 and 25).
0 – 9
Enters a number.
1 – 5
Enters a preset station.
CLR
Erases the misentry.
ENT
Confirms selection.
* The search method differs according to the selected seek mode.

Searching for a station directly

While listening to the radio, you can search for a
station frequency directly using the number buttons.
1
Press DIRECT to enter the search mode.
2
Press a number button to select a desired
station frequency.
• To erase a misentry, press CLR.
3
Press ENT to confirm.
To exit the search mode: Press DIRECT.
ENGLISH 43