JVC KW-M785BW Instruction Manual page 9

In-Car Connections In-Car Connections
• Once the connection is established, it is registered
in the unit until you initialize the Bluetooth settings
(page 40) or the unit itself (page 40). Up to five
devices can be registered in total.
• To use the Bluetooth function, you need to turn on
the Bluetooth function of the device.
Auto pairing
When <Auto Pairing> is set to [ON] (page 28),
Bluetooth devices are automatically paired.
• For iPhone with Apple CarPlay and Android device
with Android Auto: When the device is connected
via USB, it is automatically paired regardless of this
setting.
Automatic Wi-Fi connections
This unit is equipped with the Wi-Fi function.
• You can turn on or off the Wi-Fi function on the
<Wireless/HDMI SETUP> settings. To use the
Wi-Fi function, select [Wi-Fi] (page 40).
Once your iPhone or Android device is paired
successfully with Bluetooth or connected with
USB for Apple CarPlay or for Android Auto, it is
automatically connected with Wi-Fi. And from the
next time on, it is automatically connected through
Wi-Fi.
• Turn on the Bluetooth and Wi-Fi functions on your
iPhone or Android device.
• It is necessary to connect the GPS antenna in order
to use wireless Apple CarPlay.
Pairing a Bluetooth device using SSP
(for Bluetooth 2.1)
1
Display the Home screen.
2
Display the <Device List> screen.
From the Home screen (page 3), touch as
follows:
Then, on the <Settings> screen, touch as follows:
[System] → <Connections SETUP> : [Enter]
On the <Connections SETUP> screen, touch as
follows:
<Device List> : [Enter]
• You can also use the pop-up function menu to
display the <Device List> screen (page 13).
3
Make the unit ready for pairing.
On the <Device List> screen:
Please open Bluetooth settings on your device and
select the device name below
KW-MXXXXX
Cancel
4
Search for the unit "KW-M785BW" from
your Bluetooth device.
5
Confirm the request both on the device
and the unit.
On the device:
Confirmation method varies for the device.
On the unit:
BT Pairing request
To perform BT Pairing
Please confirm the device display
KW-MXXXXX (device name)
012345 (PIN code)
Pair Cancel
Pairing is complete.
To reject the request: Touch [Cancel].
6
Register the usage of the Bluetooth
device.
• See "Registering the usage of the devices" on
page 9.
ENGLISH 7