JVC KW-M785BW Instruction Manual page 42

Settings Settings
<PIN Code>
Shows the current PIN code for this unit.
• This setting is available only when iPhone with Apple
CarPlay is not connected.
<Device Name>
Shows the device name of this unit— KW-M785BW.
<Bluetooth Device Address>
Shows the Bluetooth device address of this unit.
<Initialize>
Touch and hold [Enter] to reset all settings you
have made for using Bluetooth mobile phones and
Bluetooth audio players.
<TEL SETUP>
Configure settings for using Bluetooth mobile phones.
For details, see page 28.
• This setting is available only when iPhone with Apple
CarPlay is not connected.
<Wi-Fi Setup>
Shows the device name, device address and password
of this unit.
<Device Audio Control>
Adjust the device sounds. For details, see page 11.
40 ENGLISH
<Driving Position>
Set your driver's seat position of your car – [LEFT]
(initial) or [RIGHT].
This setting changes the sidebar/button position of
Apple CarPlay/Android Auto screens accordingly with
the driver seat position.
• This setting is available only when iPhone with Apple
CarPlay and Android device with Android Auto are
not connected.
<Android Mode Select>
Select your Android usage — either [Android Auto]
(initial) or [Mirroring for Android].
• This setting is available only when AV source is
turned off with no device connected via USB.
<Reset Android Auto Wireless Connection>
Reset the password of Android Auto wireless
connection. For details, see page 11.
<Beep>
This setting is available only when 2-way speaker
system is selected (page 32).
• ON (Initial): Activates the key-touch tone.
• OFF: Deactivates the key-touch tone.
<SETUP Memory>
Memorize, recall, or clear the settings you have made.
• The memorized settings are kept even when the unit
is reset.
Touch [Yes] to display the setting screen, then select
an operation:
• Recall: Recalls the memorized settings.
• Memory: Memorizes the current settings.
• Clear: Clears the currently memorized settings and
return to the factory (initial) settings.
• Cancel: Cancels.
A confirmation message appears. Touch [Yes].
<Wireless/HDMI SETUP>
Selection for wireless Apple CarPlay/Android Auto or
HDMI device.
• HDMI: Select this to use the connected HDMI device.
Wireless connected Apple CarPlay and Android Auto
will be disconnected.
• Wi-Fi (initial): Select this to use wireless Apple
CarPlay/Android Auto. The system of this unit is
rebooted after touching [OK].
<Initialize>
Initialize all settings you have made. Touch and hold
[Enter] to initialize the settings.
• After initializing the settings, adjust the settings on
the <Initial Settings> screen.