JVC KW-M785BW Instruction Manual page 34

Settings Settings
<Sound Lift>
Moves the center of the sound to the lower or higher
point. Select the height.
• OFF (Initial)/Low/Middle/High
<Fader/Balance>
J K H I
Touch [ ]/[ ]/[ ]/[ ] or drag the
<Fader>
When <X'over Network> is set to [2 way], you can
adjust the front and rear speaker output balance.
• F15 to R15 (Initial: 0)
<Balance>
Adjusts the left and right speaker output balance.
• L15 to R15 (Initial: 0)
To clear the adjustment: Touch [Center].
32 ENGLISH
<Speaker/X'over>
Preparation:
Before making the adjustment for <Speaker/X'over>,
select the appropriate crossover network mode
according to the speaker system (2-way speaker
system or 3-way speaker system).
mark to adjust.
1
Turn off the AV source.
From the Home screen (page 3), touch as
follows:
2
Display the <X'over Network> screen.
• Press the Volume – button on the monitor panel
and touch the upper right portion on the touch
panel at the same time:
3
Select the crossover network mode.
[2 way]
[3 way]
A confirmation message appears. Touch [Yes].
Select this when 2-way system
speakers are used (front/rear/
subwoofer).
Select this when 3-way system
speakers are used (tweeter/mid
range/subwoofer).
Now, you can adjust the <Speaker/X'over>
settings.
1
Display the <Settings>
→
<Speaker/X'over> screens (page
2
1
Select a car type ( ), select the location
2
of the speakers ( )*, and then display the
<Speaker Select> screen (
Car Setting
OFF
OFF
Front
Lower Door Area
* <Speaker Location> is available only when <X'over
Network> is set to [2 way].
<Speaker Location> for rear speakers is only available when
the rear speakers are selected for <Speaker Select>.
<Audio>
→
30).
3
).